Truechip
loading...
Thank you for your query. We will reply to you at the earliest.

USB 4.0

Products >> Verification IPs >> USB 4.0

USB 4.0 Verification IP (VIP)

Truechip's USB4 VIP provides an effective & efficient way to verify components interfacing with a USB4 interface on an IP or SoC. Truechip's USB4 VIP is fully compliant with the USB4 Specification Version 1.0 (March 2022) from USB-IF. This VIP is lightweight and offers an easy plug-and-play interface, so it doesn't add to the design cycle time.

Key Benefits of USB 4.0 VIP

  • Available in native SystemVerilog (UVM/OVM/VMM) and Verilog
  • Unique development methodology to ensure the highest levels of quality
  • Availability of Compliance & Regression Test Suites 
  • 24X5 customer support
  • Unique and customizable licensing models
  • Exhaustive set of assertions and coverage points with connectivity example for all the components
  • Consistency of interface, installation, operation, and documentation across all our VIPs
  • Provide a complete solution and easy integration in IP and SoC environments.

Features of USB 4.0 VIP

  • Fully compliant with USB4 specification v1.0 (March 2022) and Connection Manager version 1.0.
  • Supports USB3.2 Specification, Revision 1.1 and backward compatibility to USB2.0.
  • Supports USB Power Delivery Release 3.1, Version 1.8 and Type-C v2.2.
  • Supports Thunderbolt (TBT3) interoperability.
  • Compliant with PCIe Specification Revision 4.0 and DisplayPort 1.4a with Alt Mode support.
  • Supports SERDES and PIPE v6.1.1 Interface for USB4, USB3, DP and PCIe.
  • Compliant with CTS USB4CV 0.9.2.3 test suite
  • Support for Gen2 (10GB/s / 20GB/s) and Gen3 (20GB/s / 40GB/s) speeds.
  • Supports tunnelled traffic of PCIe, USB3 and DisplayPort using Protocol Adapters.
  • Supports Inter-Domain and TMU Block with Bidirectional and Unidirectional Timesync Handshake, and STLP mode is also supported.
  • Supports Connectivity of Device Routers (HUB and DEVICE) for Max. 5 depths in USB4 spanning tree
  • Supports USB2 Data Transfer using the USB2 Channel in parallel to the USB4 channel in the Type-C interface.
  • Supports Gen2 and Gen3 encoding with RSFEC Block – RS (198, 194) over GF (2 ) and Lane Bonding support.
  • Supports Gen2/Gen3 LFPS transmission and detection mechanism with Electrical IDLE.
  • Supports Sideband communication - AT, RT (Addressed and Broadcast) and LT transactions.
  • Supports Gen2/Gen3 Lane Initialization (Phase 1, Phase 2, Phase 3, Phase 4 and Phase 5) including all supported TxFFE Presets and its bypass mechanism.
  • Supports Gen2/Gen3 Scrambler/Descrambler and their bypass mechanism.
  • Supports Gen2/Gen3 Precoding Insertion and Removal mechanisms with bypass options.
  • Provides SSC and PPM support.
  • Supports Skew/Deskew management using De-Skew OS (Gen2 and Gen3).
  • Supports all Gen2 and Gen3 Logical Layer ordered sets like SLOS (SLOS1 and SLOS2), TS1, TS2, CL1_REQ, CL1_ACK, TSNOS etc.
  • Supports 64/66b and 128/132b encoding/decoding for Gen2/Gen3 operations.
  • Supports Reed-Solomon Forward Error Correction (RS-FEC) Error detection and recovery mechanism.
  • Supports all Gen2/Gen3 Lane Adapter states, including all transitions.
  • Supports USB4 Port Disconnect operation and Lane Disable/Enable mechanism.
  • Supports all power management states - CL0s, CL1 and CL2 and respective objections.
  • Supports all USB4 Link Error cases and recovery mechanism.
  • Supports run-time controllable disable and disconnect mechanism.
  • Supports Sleep and Wake mechanism.
  • Resets like Power-On Reset, On-the-Fly Reset, etc. are supported.
  • User-controlled device attach/detach function.
  • Supports Sideband register space and Configuration Space (Router CS, Adapter CS, Path CS and Counter CS).
  • Supports all Router Operations and Port Operations – both required and optional.
  • Supports Tunnelled Link Management and Control Packets with a credit-based flow control mechanism.
  • Provides Bandwidth arbitration and prioritization of traffic in a Domain.
  • Supports Path setup and path teardown mechanisms.
  • Creates and manages routing tables for connected Ingress and Egress adapters.
  • Supports Time synchronization packets and handshakes in both inter-domain and intra-domain.
  • Supports Router Configuration and addressing mechanisms.
  • Provides Enumerations for Host, HUB and Device and its bypass mechanism.
  • Supports Router state machine and all transitions.
  • Supports Hot-Plug and Hot-Unplug Events with Downstream Port Reset mechanism.
  • Supports USB3/USB2 Data transfer using PCIe tunnelling and xHCI controller in TBT3 Mode for USB3.2 HUB/USB2.0 HUB in USB4 HUB (DOCK).
  • Supports callback and configuration bit mechanism for error injection and stress test scenarios.
  • Supports all USB4 Specification timers with scaling factors to reduce simulation time and enable robust testing.

Deliverables of USB 4.0 VIP

  • USB4 Host/Device/HUB (including DOCK)
  • USB4 BFM/Agents for:
    • Physical Layer
    • Transport Layer
    • Configuration Layer
    • Protocol Adapter Layer – USB3, PCIe and DP
    • TMU Block
    • Host Interface Adapter Layer
    • Connection Manager
  • USB4 Layered Monitor and Scoreboard
  • USB4 Test Environment and Test Suites:
    • Basic and Directed Protocol Tests
    • Low Power Tests
    • Error Scenario Tests
    • Stress Tests for each standard layer
    • Random Tests
    • Compliance Test Suite (from USB-IF)
    • Assertions and Cover Points
  • Integration Guide, User Manual, Quick Start Guide, Test Plan, Regression Lists and Release Notes.
  • TrueEye GUI analyzer for simulation packet flow and usage guide
USB 4.0 vip
Download the Product Brochure from here